The Wii was one of the most pop home consoles of all time. It came out in 2008, and has AV connections available to connect the Wii console to a TV. Yet, newer TVs with many different connection types may cause you lot a lot of confusion if you want to play your Wii on it.

Despite what type of Boob tube you lot're using, in that location is most likely a way to claw the Wii up to it. You may just need to detect dissimilar types of cables than you already accept.

In the sections beneath, you'll find directions for connecting the Wii using different types of cables, and any extra steps you may demand to accept depending on the cables involved.

Connecting a Wii To a TV With AV Cables

Here is how to connect the Wii to a Television receiver using AV cables, which are what the organization originally comes with.

  1. Discover a set of 3 inputs on your TV which should be yellowish, white and ruby. They may also be labeled as Video and Audio. These are your AV inputs.
  1. Insert the AV plugs co-ordinate to color, so they lucifer to the input's color on your TV. Yellow = Video, White = Audio Left or Mono, Cerise = Audio Right
  1. On the back of the Wii is a connector for the AV Out plug on the opposite terminate of the AV cablevision, which you will plug it in to.
  1. Turn on your Idiot box and find your input pick, either on your remote or Idiot box. This may be seen as Input Select, Input, or Tv set/Video. Then select AV to view your Wii. Depending on your Television set, these may be labeled slightly differently, such as AUX or EXT. It may too be on channel 00 or 99.

Connecting a Wii To a TV With Component Cables

With component cables, the steps for setting them upwardly with the Wii are basically the same as with AV cables.

  1. At that place should be a set up of five ports on your TV if it has the power to connect to component cables. These ports should be 2 ports for audio colored red (correct, or R) and white (left, or L), and iii for video, colored crimson (Pr/Cr), bluish (Pb/Cb), and green (Y).
  1. Connect the component cables into the corresponding colors.
  1. Connect the cable to the back of the Wii on the AV Out port.
  1. Progressive Scan will then demand to be enabled if your TV has information technology.
  1. Power on the Wii and find the input option for your Boob tube and switch it to view the AV input.

Connecting a Wii To a TV With HDMI

The original Nintendo Wii, unfortunately, does non have an HDMI port. This doesn't necessarily hateful that you tin't play it on a TV with exclusively HDMI inputs, though.

There are many adapters that permit you to connect your Wii to an HDMI port, by plugging directly into the console. This makes adapters like the Portholic Wii to HDMI Converter easy to utilise.

  1. Connect the HDMI adapter into the dorsum of your Wii. Then insert your HDMI cable into the adapter.
  1. Locate the HDMI port on your TV, unremarkably on the back or sides. Plug the other end of the HDMI in.
  1. Turn on your Wii and find the input selection on your Tv set. Select the HDMI input yous connected the cable to.

Connecting a Wii To a Boob tube With a SCART Connector

On the other hand, if you have a much older TV with SCART connections you'd similar to connect your Wii to, this can be washed also. SCART connectors also plug into some splitters, which give you lot the ability to use more than ports if needed.

As TVs supporting SCART connection have become increasingly obsolete, these connectors and adapters are few and far betwixt. However, y'all tin still buy a SCART adapter that will hook up to your Wii, such as this one.

Here'south how to use the adapter to connect your Wii to your Television:

  1. Plug your Wii's RCA cables (the AV cables) into the end of the SCART adapter with the yellow, ruby, and white inputs with the same color plugs.
  1. Plug the SCART into your Boob tube or splitter. Then change the Tv set input to view from this connection.

Connecting a Wii To Any TV

With all of these different connections bachelor, yous should be able to connect your Wii to any Telly out there. The final things yous'll want to keep in mind is that the Wii only outputs a max resolution of 480p, and then don't expect to get annihilation more out of it on a newer television.

You may also need to modify the settings on your Wii so that information technology fits the screen of the TV you have it continued to. In the Wii, you lot can get to Settings > Wii Settings > Screen to modify the screen position, and change the resolution to EDTV or HDTV to output at 480P.

You lot tin also go into the Widescreen Settings and change the setting from Standard (4:three) to Widescreen (16:nine) or vice-versa.